Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterSpring Repair in Kent, WA
Garage door spring repair in Kent typically costs between $250 and $550 depending on the specific spring type, wire gauge, and the weight of your door. Because springs are under extreme tension, we always replace them in pairs to ensure the door remains balanced and the opener doesn’t struggle against an uneven load, though track realignment may also be needed if the door has shifted. If your door won’t open or you heard a loud bang in your garage, call us at (425) 906-3489 for a clear, upfront estimate before we start any work.
At Servo Garage Doors Kent, we operate under The Haven Standard, which means we never guess at pricing or perform work without your written approval. We understand the specific challenges homeowners face in Kent, from the moisture-heavy climate that can accelerate corrosion on metal components to the specific weight requirements of high-end doors from manufacturers like Clopay and Wayne Dalton. Whether you are dealing with a broken torsion spring or a failed extension spring system, our approach is built on transparency. We document the failure, explain the mechanics, and provide a written price per Clause 1 of The Haven Standard. For broader issues, you can learn more about our Garage Door Repair in Kent services.
When You Need Spring Repair
Springs do not wear out all at once; they typically fail due to fatigue after thousands of cycles. In Kent, we often see premature spring failure caused by rust buildup from our humid, rainy winters, which weakens the metal wire over time. Recognizing the symptoms early can prevent damage to your opener’s motor and gears.
- The Loud Bang: If you heard a noise that sounded like a gunshot or a heavy object hitting the concrete while the door was closed, a torsion spring has almost certainly snapped. This is the most common indicator of failure.
- Door Won’t Lift: If your opener runs, but the door only moves a few inches or refuses to budge, the springs are no longer providing the counterbalance force required to lift the door weight.
- Crooked Movement: If the door rises unevenly or looks tilted while operating, one of the springs may have lost its tension or snapped, causing the door to bind in the tracks.
- Visible Gaps: Inspect your torsion springs above the door. A clear gap in the coils indicates a break. If you see this, do not attempt to operate the door, as this creates a significant safety risk for anyone near the mechanism.
- Manual Lift Difficulty: If you pull the emergency release cord and find the door is extremely heavy to lift by hand, the springs have failed. A properly balanced door should be easy to lift with one hand.
Spring systems store immense energy. Attempting to adjust or replace these parts without the proper tools-like winding bars and calibrated torque measuring equipment-can result in serious injury. If you notice these symptoms, please call (425) 906-3489 so a trained technician can inspect the system safely.
Our Spring Repair Process
We follow a strict, documented process for every spring replacement. Clause 4 of The Haven Standard requires that we photograph the failed component before we ever quote a replacement. This ensures you know exactly what failed and why. Here is how we handle your repair:
- Visual Inspection and Documentation: Upon arrival, our technician photographs the broken spring or the specific point of failure. We also check the condition of your cables, drums, and center bearing plate to ensure the entire system is healthy.
- Written Scope and Price: Before we touch a single bolt, we provide a written price and scope of work. This is Clause 1 in action. You will know exactly what you are paying, and there are no hidden fees or surprise upcharges once we start.
- System Calibration: We use high-cycle, oil-tempered springs that are matched to the exact weight and height of your door. We do not use one-size-fits-all hardware. We measure the wire diameter and coil length to ensure the new springs provide the correct counter-balance.
- Safety Check and Testing: After installation, we cycle the door multiple times to ensure the tension is balanced. We check the limit settings on your opener to ensure it isn’t overworking.
- Final Photo Record: We provide you with a documented photo record of the finished work. This serves as your paper trail, proving the new parts were installed correctly and the system is functioning as intended.
We service all major brands, including LiftMaster, Genie, and Amarr. Whether you have a standard residential door or a heavier carriage-house style door, we have the correct spring specifications on our trucks.
Before
AfterSpring Repair Pricing in Kent
We believe in upfront, written pricing. We do not use “call for a quote” as a way to lure you in for a sales pitch. Below is a breakdown of what you can expect regarding how much garage door repair costs in 2026 for spring work in the Kent market.
| Service Item | Typical Price Range |
|---|---|
| Single Torsion Spring Replacement | $250 - $380 |
| Dual Torsion Spring Replacement (Pair) | $350 - $550 |
| Extension Spring System Conversion/Replacement | $300 - $450 |
| Hardware Refresh (Cables/Bearings/End Plates) | $150 - $300 (if added to spring job) |
These ranges reflect the cost of the spring hardware, the labor, and the safety testing required to balance the door properly. If another company has provided you with a written estimate for cable repair or other work, we offer a Free Second Opinion. Simply bring the paperwork, and we will review it against our own standards. Call (425) 906-3489 to schedule your service or ask about our current availability.
FAQs - Spring Repair
Is it cheaper to repair or replace the garage door springs?
Springs are considered a wear item, so “repairing” them is not possible; they must be replaced when they fail. Replacing both springs simultaneously is almost always the most cost-effective choice because it saves you on a second service call if the second spring fails shortly after the first one.
Can you come out to fix my springs today?
Yes, we prioritize spring repairs because they effectively lock your car inside your garage, which is a major security and convenience issue. When you call (425) 906-3489, we can confirm our current technician availability in Kent and provide a realistic arrival window.
How long do garage door springs usually last?
Most residential springs are rated for 10,000 to 15,000 cycles. In a typical Kent household, this usually translates to about 5 to 7 years of use. If you have a heavy wood door or use your garage as the primary entry point for your home, you may see them wear out sooner.
Do I need to be home for the spring repair?
While you do not strictly need to be home if we can access the garage, we prefer you are there for at least the beginning and end of the job. We want you to see the failed component we photographed and walk through the final operation of the door with us. This transparency is the core of our business model.
If you suspect a spring failure, do not try to force the door open, as this can snap the cables or damage the opener trolley. Call us at (425) 906-3489 for a professional assessment. We provide free estimates and stand behind every job with our 365-Day Done Right Promise. For any other needs, explore our Garage Door Repair services to see how we maintain the rest of your system.
Written by Marcus Deller, Owner at Servo Garage Doors Kent, serving Kent.