Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Kent
Garage Door Repair in Kent and installation typically runs $700 to $2,200 for a new sectional door, with most single-car doors on the lower end and custom or double-car steel doors on the higher end. We quote a flat, written price before any work starts, so the number on the estimate is the number on the invoice. If you’re on East Hill with a door that’s been there since the Reagan administration, call us at (425) 906-3489 and we’ll tell you what it needs and what it costs, in dollars, before anything gets ordered.
We work throughout Kent, from the Scenic Hill neighborhoods off 116th Ave SE up through Panther Lake and down to the valley floor. Our crews know the difference between an East Hill tract-home sectional from 1989 and a valley-floor commercial roll-up, and we quote accordingly. Marcus Deller runs Servo Garage Doors Kent, and every job closes with a documented photo record of what we found and what we did.
Why Servo Garage Doors Kent Is Kent’s Preferred Garage Door Installation Company
Kent homeowners research before they call. They read the three-star reviews, they want the price range on the page, and they’re more impressed by documentation than by how long we claim to have been around. That’s exactly how we operate. Since 2015, Servo has completed more than 18,000 garage door jobs across the region, every single one quoted with a flat, written price before work began, under Clause 1 of The Haven Standard. There’s no “call for a quote” with us. The quote arrives on paper, with the scope, before you commit to anything.
The technicians who show up at your Kent home are background-checked and uniformed, with their license number on the page and on the truck, not buried in fine print. Calls are answered by a live person 24 hours a day, including holidays. When a Kent homeowner calls with an emergency, they get a named technician and an on-the-way text, not a callback window and a recording. Clause 4 of The Haven Standard is the rule Marcus built the company on in 2015: the customer sees the failed part before anyone quotes a replacement. We photograph the broken spring, the snapped cable, the bent track, and you see the evidence before you spend a dollar.
Our Garage Door Installation in Kent work carries the 365-Day Done Right Promise. If it’s not right, we make it right, backed by The Haven Standard and a terms page, not a handshake. Dispatch and scheduling are coordinated from the brand’s Seattle office; crews serve Kent locally every day.
Our Garage Door Installation Services in Kent
Our Garage Door Installation team handles the full range of residential door work across Kent, from straightforward single-car replacements on East Hill starter homes to full custom steel doors on newer builds near Lake Meridian. Here’s what most Kent homeowners call us for.
New Door Installation
A new sectional door in Kent runs $700 to $2,200, installed. That includes removing the old door, installing the new panels, tracks, springs, and hardware, and setting proper balance before we leave. We carry full door systems on the truck for common 8×7 and 9×7 openings, which means most Kent installations happen in a single visit. For custom sizes or wood doors, we measure first, order, and schedule the install when the door arrives. You get a written price before the order goes in, per Clause 1.
Single Car Door
Single-car garage doors in Kent, especially on the 1970s and 1980s split-levels scattered across East Hill, typically run $700 to $1,400 for a new steel sectional, depending on insulation, panel thickness, and whether we’re retrofitting from an old one-piece door. The opening width matters: older single doors are often 8×7, and the existing framing may need adjustment to accept a modern sectional with proper track clearance. We’ll tell you that before you buy, not after.
Double Car Door
Double-car doors on Kent tract homes from the late 1980s and early 1990s are the workhorse of the East Hill. Most are 16×7 steel sectionals with original torsion spring systems now past their roughly 10,000-cycle design lifespan. A new double door in Kent runs $1,200 to $2,200, and that price includes new tracks, new high-cycle springs, and proper balance. If your opener is original too, we’ll check it during the install and tell you whether it’s worth keeping or whether a new LiftMaster in Kent or Chamberlain makes more sense. The answered question, not the upsell.
Custom Garage Door
Custom garage doors in Kent are common in two places: renovated mid-century homes near Scenic Hill that want a wood door to match the architecture, and newer builds around Lake Meridian and Panther Lake where homeowners want a specific panel profile or finish. Custom doors run from $1,400 to $2,200 and up depending on material and dimensions. We measure everything on site, quote a flat written price, and you approve the scope before the order goes to the manufacturer. Steel custom doors in Kent get specified with a heavier gauge than stock doors because the Green River Valley humidity works on thinner steel faster than it would in Renton or Auburn.
Steel Doors
Steel doors are the right answer for most Kent homes. They hold up to the moisture, they’re available in insulated and non-insulated versions, and they don’t warp like wood in the valley’s damp air. A standard steel sectional for a Kent double garage runs $1,200 to $1,900 installed. If you’re replacing an original 1980s or 1990s door, we’ll spec a 25,000-cycle torsion spring set rather than the stock 10,000-cycle springs, because the extra cost is modest and the door will outlast your time in the house.
Wood Doors
Wood garage doors in Kent look right on the East Hill’s mid-century and craftsman-influenced homes, but they require more maintenance than steel. The Green River Valley’s persistent ground fog keeps moisture in the air through most of the year, and wood doors need refinishing every two to three years to hold up. If you want wood, we’ll quote it honestly and tell you what the maintenance picture looks like in Kent’s specific climate. Most homeowners who ask about wood end up choosing a steel door with a wood-grain finish, and we’re fine with that. The decision is yours; the documentation is ours.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Kent
We service and install all eight major garage door brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. For Kent homeowners, that brand coverage matters when your original Clopay from 1989 finally gives out and you want a direct replacement rather than a retrofit. We stock common parts for Craftsman, Raynor, LiftMaster, and Chamberlain doors locally, and we can source through our supplier network same-week for anything unusual. If you’ve got a legacy Craftsman opener or a Raynor sectional that’s still functional, we’ll tell you honestly whether it’s worth keeping or whether a replacement makes more sense than another repair cycle.
Common Garage Door Installation Problems We See in Kent Homes
- Cohort spring failures on East Hill. The tract subdivisions built between 1985 and 1995 all used similar torsion springs, installed the same year. Those springs are now failing as a group. We run back-to-back spring replacements on the same street in a single morning because every house on the block is the same age.
- Humidity-driven corrosion from the Green River Valley. Kent’s low-lying position traps marine air and ground fog, producing higher humidity than Renton’s plateau or Auburn’s higher elevations. That accelerates rust on steel springs, cables, and bottom brackets. Torsion spring failures spike in late winter when months of damp, unlubricated use combine with overnight temperature drops that stress already-corroded metal.
- Legacy one-piece doors with no parts available. Some Kent homes still have one-piece doors from the 1970s and early 1980s. The drums, end bearing plates, and extension springs on those doors are often obsolete. When the spring fails, there’s no replacement part to order. The fix is a full retrofit to a sectional door, which we quote as a complete job rather than a patch.
- Opener strain from unbalanced doors. When a double-car door’s torsion springs weaken, the opener motor takes up the load. We see LiftMaster and Chamberlain openers on Kent homes running hot, straining against spring loads they were never designed to carry. The opener fails, but the root cause is the springs. A proper installation addresses the whole system, not just the part that finally broke.
Pricing for Garage Door Installation in Kent, WA
Here’s what garage door installation actually costs in Kent, in dollars, on paper, before any work starts. These are the flat written price ranges we quote for this market. The final number within these ranges depends on door size, material, insulation, and whether we’re retrofitting from an older system.
| Service | Price Range in Kent |
|---|---|
| New Door Installation | $700 - $2,200 |
| Panel Replacement | $250 - $500 |
| Track Realignment | $120 - $240 |
| Roller Replacement | $110 - $220 |
Every quote is written, flat, and scoped. The price you approve is the price you pay. If you bring us a written estimate from another company, we’ll give you a free second opinion on it, no coupon required. Call (425) 906-3489 and you’ll get a person, not a recording, and a written price before anything moves.
We Also Serve Cities Near Kent
Our Kent crews work throughout the Green River Valley and the surrounding plateau. We serve Renton, Auburn, Federal Way, and Maple Valley with the same written-price system and the same documented photo record on every visit. If you’re in one of those cities, the phone number is the same, the flat pricing is the same, and the evidence you receive when the job’s done is the same.
Serving Kent, WA - Our Local Coverage Area
We’re based in the Kent area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Kent
Original torsion springs from East Hill tract homes built in the late 1980s and early 1990s have a design lifespan of roughly 10,000 cycles, and most of them are past that now. You’ll see visible corrosion at the coil, hear a loud snap when the spring breaks mid-cycle, or notice the door feels heavy when you disconnect the opener and lift it manually. If your door won’t stay up on its own or the opener sounds like it’s working harder than it used to, the springs are likely done. Call (425) 906-3489 and we’ll inspect it, photograph what we find, and quote a replacement before you spend anything.
Yes. Kent’s low-lying position in the Green River Valley traps marine air and ground fog, producing persistently higher humidity than Renton’s plateau or Auburn’s higher elevations. That moisture accelerates corrosion on steel springs, cables, and bottom brackets noticeably faster than surrounding areas. It’s common for a Kent spring to show significant rust at the 7-year mark when a comparable Renton spring would still look clean. We spec corrosion-resistant hardware and high-cycle springs on Kent installs for exactly this reason.
Replace it. One-piece doors from the 1970s and 1980s use drums, end bearing plates, and extension springs that are largely obsolete. When a spring fails, there’s often no replacement part to order, and the door’s weight distribution makes opener strain worse over time. A new sectional door in Kent runs $700 to $2,200 installed, and the retrofit includes new tracks, new springs, and proper balance. You’ll get a written price for the full job before we order anything, so the decision is informed, not pressured.
A typical double-car sectional door weighs between 150 and 250 pounds depending on insulation and panel gauge. The torsion springs are designed to offset that weight, which is why a properly balanced door opens with two fingers. When the springs weaken from age or corrosion, the opener motor takes up the load. That’s why you hear the opener laboring, and that’s why the logic board or trolley carriage eventually fails. The fix is replacing the springs and rebalancing the door, not just swapping the opener. Call (425) 906-3489 and we’ll measure the actual spring wire diameter and show you the evidence.
Because the tract subdivisions on East Hill were built all at once, in big phases between 1985 and 1995, using the same door hardware installed the same year. Those springs fail as a cohort. We’ll replace a torsion spring on 116th Ave SE, drive two blocks, and find the exact same spring, same age, same failure mode on the next street over. It’s not chance. It’s construction history. If your neighbors have had spring work done recently, yours is likely next, and a written quote now is cheaper than an emergency call later. Call (425) 906-3489 for an exact price, free of charge.
Get a Written Price for Garage Door Installation in Kent
You don’t need to guess what your new garage door will cost. You need a flat, written number and a scope you can read before you approve anything. That’s what we deliver in Kent, from East Hill to the valley floor. Call (425) 906-3489 for a free estimate, a live person on the line, and a documented photo record of everything we find and everything we do. The price you approve is the price you pay, and Marcus Deller stands behind the work 365 days a year.
Written by Marcus Deller, Owner at Servo Garage Doors Kent.